Structural adhesives
High performance, thermally-conductive metal-to-metal bonder
This 2-part, medium viscosity, high-performance adhesive is perfect for bonding metal sheets or electrical components when you need toughness and thermal conductivity.
All marks used are trademarks and/or registered trademarks of Henkel and its affiliates in the US, Germany, and elsewhere.
- Description
- Technical specification
LOCTITE® EA 9497 is a high-temperature-resistant structural bonder with thermal conductivity. This 2-part, medium-viscosity epoxy reliably bonds metal sheets or electrical components where toughness and thermal conductivity are required. Works in temperatures of up to 200°C (392°F) and provides large gap fill and high compression strength in harsh environments. Ideal for heat dissipation applications such as bonding metal sheets for high heat transfer and potting electrical components. It is also suitable for Surface Permanent Magnet (SPM) and Interior Permanent Magnet (IPM) bonding.
-
High-performance, thermally-conductive structural bonder
-
Temperature resistant up to 200°C (392°F)
-
High impact & humidity resistance
-
Large gap fill (up to 3mm / 0.11")
-
Room temperature, heat or induction cure
- Product category:
- Structural adhesives
Technologies:
-
Thermosets, 2K general epoxy
- Applications:
- Structural bonding
- Cure type:
- Room temperature (ambient) cure
- Hardener: Casson viscosity, cone & plate, @ 25.0 °C:
- 8.0 Pa∙s - 24.0 Pa∙s
- Hardener: Color:
- Gray
- Mix ratio, by volume:
- 2 : 1
- Mix ratio, by weight:
- 100 : 50
- Mixed: Pot life, @ 25.0 °C:
- 165.0 min. - 255.0 min.
- Mixed: Shear strength, Mild Steel (grit blasted):
- 20.0 N/mm²
- Mixed: Thermal conductivity:
- 1.4 W/mK
- Number of components:
- 2 part
- Resin: Casson viscosity, cone & plate, @ 25.0 °C:
- 5.0 Pa∙s - 16.0 Pa∙s
- Resin: Color:
- White
