Wear resistant coatings
General purpose wear prevention solution
A 2-part, designed to protect, rebuild and repair processing equipment subject to wear from coarse particles.
All marks used are trademarks and/or registered trademarks of Henkel and its affiliates in the US, Germany, and elsewhere.
1323940
-
LOCTITE® PC 7218 Nordbak Wearing Compound, 25 lb Hobbok / pailen_GLIDH: 1323940
-
LOCTITE® PC 7218 Nordbak Wearing Compound, 25 lb Hobbok / pailLOCTITE PC 7218 B known as LOCTITE NDBK WC 25LB PT B (1324010)en_GLIDH: 1323940
-
LOCTITE® PC 7218 Nordbak Wearing Compound, 25 lb Hobbok / pailLOCTITE PC 7218 A known as LOCTITE NDBK WC 25LB PT A (1324009)en_GLIDH: 1323940
-
LOCTITE® PC 7218 Nordbak Wearing Compound, 25 lb Hobbok / pailLOCTITE PC 7218 A known as LOCTITE NDBK WC 25LB PT A (1324009)en_GLIDH: 1323940
-
LOCTITE® PC 7218 Nordbak Wearing Compound, 25 lb Hobbok / pailen_GLIDH: 1323940
-
LOCTITE® PC 7218 Nordbak Wearing Compound, 25 lb Hobbok / pailLOCTITE PC 7218 B known as LOCTITE NDBK WC 25LB PT B (1324010)en_GLIDH: 1323940
-
LOCTITE® PC 7218 Nordbak Wearing Compound, 25 lb Hobbok / pailLOCTITE PC 7218 A known as LOCTITE NDBK WC 25LB PT A (1324009)es_CRIDH: 1323940
-
LOCTITE® PC 7218 Nordbak Wearing Compound, 25 lb Hobbok / pailes_CRIDH: 1323940
- Description
- Technical specification
LOCTITE® PC 7218 Nordbak Wear Prevention Coating is a general purpose epoxy resin system designed to protect parts from coarse particle abrasion or erosion on metals (with or without chemical attack). It is designed for parts such as cyclones/separator bodies, dust collectors/exhausters, pump liners/impellers, fan blades and housings, chutes/hoppers and elbows/transition points. It is trowelable and requires no additional tooling.
-
Protects metals from course particle abrasion
-
Easy to mix and apply, trowelable and non-sagging
-
Suitable for chemical attack applications
-
Renews worn surfaces fast
Application method:
Trowel
Applications:
Protective coating
Color:
Gray
Cure type:
Room temperature (ambient) cure; Two component mix
Drying time:
7.0 h
Key characteristics:
Abrasion resistant; Prolongs equipment life; Renews worn surfaces; Sag: non-sag; Wear resistant
Mix ratio, by volume:
2 : 1
Particle size:
Large
Physical form:
Paste
Recommended for use with:
Metal
