Wear resistant coatings
Impact resistant wear prevention solution
LOCTITE PC 9313, known as NORDBAK HIGH IMPACT WEARING COMPOUND, is a rubber modified epoxy with impact resistance recommended for lining and protecting.
All marks used are trademarks and/or registered trademarks of Henkel and its affiliates in the US, Germany, and elsewhere.
1327836
-
LOCTITE® PC 9313, 25 lb Hobbok / pailLOCTITE PC 9313 B known as LOCTITE NDBK HI/IM WC 25LB PTB (1327842)es_CRIDH: 1327836
-
LOCTITE® PC 9313, 25 lb Hobbok / pailLOCTITE PC 9313 B known as LOCTITE NDBK HI/IM WC 25LB PTB (1327842)en_GLIDH: 1327836
-
LOCTITE® PC 9313, 25 lb Hobbok / pailLOCTITE NDBK HI/IM WC 25LB PTA (1327843)en_GLIDH: 1327836
-
LOCTITE® PC 9313, 25 lb Hobbok / pailLOCTITE NDBK HI/IM WC 25LB PTA (1327843)es_CRIDH: 1327836
-
LOCTITE® PC 9313, 25 lb Hobbok / pailes_CRIDH: 1327836
-
LOCTITE® PC 9313, 25 lb Hobbok / pailen_GLIDH: 1327836
- Description
- Technical specification
LOCTITE® PC 9313 is a grey, 2-part, rubber modified epoxy. With impact resistance superior to ceramic tile, it is recommended for lining and protecting flumes, troughs, elbows, hoppers, discharge chutes, and other processing equipment that is exposed to both abrasion and impact under typical temperatures of -29°C to 121°C (-20°F to 250°F).
-
Cures to ceramic hardness – resists sliding abrasive wear
-
Won’t sag or shrink – conforms to overhead and irregular
surfaces, application versatility -
Renews worn surfaces fast – reduces downtime
-
Impact resistant – resists mild impact at 45° angles
-
Offers the wear resistance properties of an epoxy along with impact resistance
-
Trowelable
Application method:
Trowel
Applications:
Protective coating
Compressive strength, ASTM-D695:
12000.0 psi (83.0 N/mm²)
Cure type:
Room temperature (ambient) cure; Two component mix
Hardener: Color:
Dark gray
Key characteristics:
Impact resistant; Prolongs equipment life; Renews worn surfaces; Sag: non-sag; Shrinkage: non-shrinking; Wear resistant
Mixed: Color:
Gray
Number of components:
2 part
Physical form:
Paste
Recommended for use with:
Metal
Resin: Color:
Gray
