Part no. (SKU/IDH):
158532
IDH Name:
LOCTITE® Lamp Assembly & Power Supply Unit, 240 VAC
Light curing systems
Accepts several different spectral output type lamps
LOCTITE Lamp Assembly and Power Supply Units will accept several different spectral output type lamps, such as D, V, and H bulbs, to optimize the UV wavelength and tailor the spectral output of the light to the application.
Part no. (SKU/IDH):
158532
IDH Name:
LOCTITE® Lamp Assembly & Power Supply Unit, 240 VAC
Voltage Please make your selection 240 VAC
All marks used are trademarks and/or registered trademarks of Henkel and its affiliates in the US, Germany, and elsewhere.
-
{{#data}}
{{#distributor.isVisible}}
{{#distributor.isExpanded}}
-
{{^distributor.unique}}
{{/distributor.unique}}
- Description
- Technical specification
LOCTITE® Lamp Assembly and Power Supply Units (208 VAC & 240 VAC) consist of a 152.4 mm (6"), electrodeless H-bulb and a state-of-the-art power supply. The lamp assembly has a rapid start and restart feature that eliminates a requirement for shutters and associated shutter mechanisms.
Good to Know:
Typically used with the LOCTITE® UV Conveyor
-
High UV output with low IR output results in less heat to the substrate
-
Rapid bulb change can be accomplished in minutes
-
Full cure width of 152.4 mm (6") maintained throughout bulb life
-
5,000 hours of expected UV bulb life of the H bulb with proper handling and maintenance
-
This system is shipped standard with an H bulb, but will accept D, V, or H+ bulbs to fine-tune the output
-
No blackening at bulb ends; therefore, no decrease in cure-width
-
Power supply incorporates an on/off/standby control
-
Electrodeless bulb technology provides high intensity output
- Product category:
- UV and visible light curing systems
Technologies:
-
Specialties, equipment
- Applications:
- Light curing
- Bulb type, Recommended:
- Focus H
-
{{#data}}
{{#distributor.isVisible}}
{{#distributor.isExpanded}}
-
{{^distributor.unique}}
{{/distributor.unique}}
