Part no. (SKU/IDH):
2996614
IDH Name:
TEROSON® EP 5065, 200 ml Dual cartridge
Structural adhesives
Automotive-grade, impact-resistant panel bonder
This impact-resistant epoxy-based adhesive is perfect for collision repair, providing fatigue and impact durability, along with excellent corrosion prevention.
Part no. (SKU/IDH):
2996614
IDH Name:
TEROSON® EP 5065, 200 ml Dual cartridge
All marks used are trademarks and/or registered trademarks of Henkel and its affiliates in the US, Germany, and elsewhere.
-
{{#data}}
{{#distributor.isVisible}}
{{#distributor.isExpanded}}
- {{^distributor.unique}} {{/distributor.unique}} {{/distributor.isExpanded}} {{^distributor.isExpanded}} {{/distributor.isExpanded}} {{/distributor.isVisible}} {{/data}}
- Description
- Technical specification
Collision repair calls for tough, impact-resistant bonders like TEROSON® EP 5065. This 2-part, high-strength, solvent-free, epoxy resin-based adhesive provides excellent wedge-peel strength, even at extreme temperatures of -40°C to 80°C (-40°F to 176°F). When cured, it is hard but not brittle. This makes it ideal for structural bonding of metals when crash behaviour requirements are high (e.g. car body steel with or without e-coat, galvanized steel and aluminium). The mixed compound has a ~60-minute processing time (23°C/73°F, 50% rh) and it reaches its initial strength (0,1MPa) in ~10h at 23°C (73°F). Full cure occurs at room temperature in 48 hours; curing can be accelerated via infrared heat at 80°C (176°F) for 1 hour. For application, please use a pneumatic or manual, dual cartridge dispenser, e.g. LOCTITE HD14 Handheld Pneumatic Dual Cartridge Dispenser (200ml, item 2693824) or LOCTITE HD14 Handheld Manual Dual Cartridge Dispenser (200ml, item 2693822). Before application, surface pretreatment with TEROSON VR 10 is recommended.
-
OEM-approved
-
High crash safety over a range of temperatures
-
Excellent corrosion prevention
-
Compatible with all main types of metal used in automotive industry – adheres to a wide range of materials (without primer)
-
Can be used in combination with spot welding and riveting methods to meet OEM repair guidelines
- Product category:
- Structural adhesives
Technologies:
-
Thermosets, 1K industrial epoxy
-
Thermosets, 2K general epoxy
- Colour:
- Black
- Key characteristics:
- Odor: reduced odor
FAQ
The substrates bonded with these adhesives, react differently when impacted. TEROSON® EP 5055 is a panel bonding adhesive vs TEROSON® EP 5065 which is an impact resistant structural adhesive. Teroson EP 5065 can absorb a lot more energy and reduce the impact of a crash. An impact resistant structural bonder is usually used in joints, frame rail assemblies, strut tower assemblies and other body structure joints that have critical strength requirements. Additionally the open time (pot life) of TEROSON EP 5055 is 80 minutes; for TEROSON EP 5065 it is 60 minutes.
Both are 2-component, solvent free, spot weldable (before the product solidifies) epoxies that prevent corrosion and give lap shear strength to bonded panels. Due to their epoxy chemistry they are temperature sensitive, therefore it is recommended to allow the product to reach ambient temperature before use.
We need to ensure even mixing of the product's 2 components to ensure proper bonding performance. Therefore, we must squeeze twice. 1) Squeeze a small amount directly from the cartridge. 2) Apply the nozzle and squeeze until you see a homogenous colour in the end product coming through the nozzle.
OEM repair instructions should be used as guidance to select an adhesive for panel bonding or impact resistant structural bonding. Technical requirements change due to design variations, therefore it is critical to follow OEM instructions based on model and year.
As long as you seal the cartridge correctly with the used nozzle left on, you may store the product for 2-3 weeks, depending on the temperature in the workshop. The material left in the nozzle will serve as a perfect sealant to preserve the content inside of the cartridge.
Areas bonded with metal bonders (epoxy-based), don’t require cavity wax to ensure corrosion protection. All other areas should be coated with wax to prevent corrosion.
-
{{#data}}
{{#distributor.isVisible}}
{{#distributor.isExpanded}}
- {{^distributor.unique}} {{/distributor.unique}} {{/distributor.isExpanded}} {{^distributor.isExpanded}} {{/distributor.isExpanded}} {{/distributor.isVisible}} {{/data}}