Part no. (SKU/IDH):
2988279
IDH Name:
TEROSON® EP 5055, 200 ml Dual cartridge
Structural adhesives
Automotive grade, panel bonder
This high-strength epoxy-based adhesive is perfect for collision repair, providing excellent corrosion protection properties for bonding metal. Improves body stiffness and NVH properties, for extended vehicle lifetime and driving comfort.
-
TEROSON® EP 5055, 200 ml Dual cartridge en_GLTEROSON EP 5055 CR250ML PART A (2938430)IDH: 2988279
-
TEROSON® EP 5055, 200 ml Dual cartridge en_GLTEROSON EP 5055 DC200 ML EGFDE (3007993)IDH: 2988279
-
TEROSON® EP 5055, 200 ml Dual cartridge en_GLTEROSON EP 5055 CR PARTB 250 ml (2931110)IDH: 2988279
-
TEROSON® EP 5055, 200 ml Dual cartridge en_GLTEROSON EP 5055 DC200 ML EGFDE (3007992)IDH: 2988279
-
TEROSON® EP 5055, 200 ml Dual cartridge en_GLTEROSON EP 5055 DC200 ML EGFDE (3007993)IDH: 2988279
-
TEROSON® EP 5055, 200 ml Dual cartridge en_GLTEROSON EP 5055 CR PARTB 250 ml (2931110)IDH: 2988279
-
TEROSON® EP 5055, 200 ml Dual cartridge en_GLTEROSON EP 5055 DC200 ML EGFDE (3007992)IDH: 2988279
-
TEROSON® EP 5055, 200 ml Dual cartridge en_GLTEROSON EP 5055 CR250ML PART A (2938430)IDH: 2988279
Part no. (SKU/IDH):
2988279
IDH Name:
TEROSON® EP 5055, 200 ml Dual cartridge
All marks used are trademarks and/or registered trademarks of Henkel and its affiliates in the US, Germany, and elsewhere.
-
{{#data}}
{{#distributor.isVisible}}
{{#distributor.isExpanded}}
- {{^distributor.unique}} {{/distributor.unique}} {{/distributor.isExpanded}} {{^distributor.isExpanded}} {{/distributor.isExpanded}} {{/distributor.isVisible}} {{/data}}
- Description
- Technical specification
Collision repair calls for tough, structural bonders like TEROSON® EP 5055. This 2-part, high-strength, solvent-free, epoxy-based adhesive is designed for high-strength structural bonding and corrosion-protection of bare steel, zinc-coated steels and aluminum alloys used in the automotive industry and body repair shops. It’s particularly ideal for roof and panel bonding. The product exhibits excellent corrosion prevention and spot-weldable properties. It is necessary to use an application tool with piston rod, e.g., LOCTITE® HD14 200ml Pneumatic Dispenser/HD14 200 ml Manual Dispenser. Before application, surface pretreatment with TEROSON VR 10 is recommended.The mixed compound has a ~80-minute processing time (23°C/73°F, 50% rh) and it reaches its initial strength (0,1MPa) in ~7h at 23°C (73°F). Full cure occurs at room temperature in 48 hours; curing can be accelerated via infrared heat at 60°C (140°F) for 1 hour or 80°C (176°F) for 30 minutes.
-
OEM approved
-
Excellent corrosion prevention to sustain joint integrity and cycle time
-
Provides body stiffness; primarily used for NVH purposes and weld reduction
-
Adheres to a wide range of materials (without primer) such as aluminium, steel and sheet moulding compounds
-
Can be used in combination with spot welding and riveting methods to meet OEM repair guidelines
- Product category:
- Structural adhesives
Technologies:
-
Thermosets, 1K industrial epoxy
- Full cure time, @ 80.0 °C:
- 60.0 min.
- Recommended for use with:
- Epoxy
FAQ
The substrates bonded with these adhesives, react differently when impacted. TEROSON® EP 5055 is a panel bonding adhesive vs TEROSON® EP 5065 which is an impact resistant structural adhesive. Teroson EP 5065 can absorb a lot more energy and reduce the impact of a crash. An impact resistant structural bonder is usually used in joints, frame rail assemblies, strut tower assemblies and other body structure joints that have critical strength requirements. Additionally the open time (pot life) of TEROSON EP 5055 is 80 minutes; for TEROSON EP 5065 it is 60 minutes.
Both are 2-component, solvent free, spot weldable (before the product solidifies) epoxies that prevent corrosion and give lap shear strength to bonded panels. Due to their epoxy chemistry they are temperature sensitive, therefore it is recommended to allow the product to reach ambient temperature before use.
We need to ensure even mixing of the product's 2 components to ensure proper bonding performance. Therefore, we must squeeze twice. 1) Squeeze a small amount directly from the cartridge. 2) Apply the nozzle and squeeze until you see a homogenous colour in the end product coming through the nozzle.
OEM repair instructions should be used as guidance to select an adhesive for panel bonding or impact resistant structural bonding. Technical requirements change due to design variations, therefore it is critical to follow OEM instructions based on model and year.
As long as you seal the cartridge correctly with the used nozzle left on, you may store the product for 2-3 weeks, depending on the temperature in the workshop. The material left in the nozzle will serve as a perfect sealant to preserve the content inside of the cartridge.
Areas bonded with metal bonders (epoxy-based), don’t require cavity wax to ensure corrosion protection. All other areas should be coated with wax to prevent corrosion.
-
{{#data}}
{{#distributor.isVisible}}
{{#distributor.isExpanded}}
- {{^distributor.unique}} {{/distributor.unique}} {{/distributor.isExpanded}} {{^distributor.isExpanded}} {{/distributor.isExpanded}} {{/distributor.isVisible}} {{/data}}