Part no. (SKU/IDH):
1661893
IDH Name:
LOCTITE® FREKOTE® R-120, 20 l Can
Mould release agents
Water-based release agent for rubber applications, low build-up and transfer
A 1-part, water-based, semi-permanent mould-release agent for rubber applications demanding minimal mould build-up and low transfer.
Part no. (SKU/IDH):
1661893
IDH Name:
LOCTITE® FREKOTE® R-120, 20 l Can
All marks used are trademarks and/or registered trademarks of Henkel and its affiliates in the US, Germany, and elsewhere.
-
{{#data}}
{{#distributor.isVisible}}
{{#distributor.isExpanded}}
- {{^distributor.unique}} {{/distributor.unique}} {{/distributor.isExpanded}} {{^distributor.isExpanded}} {{/distributor.isExpanded}} {{/distributor.isVisible}} {{/data}}
- Description
- Technical specification
LOCTITE® FREKOTE® R-120 is a water-based, semi-permanent release agent for rubber moulding. When applied to a pre-heated surface, the product bonds chemically to the mould to form a thin, inert, thermally stable coating capable of releasing all natural and synthetic polymers including some thermoplastic urethanes. It is recommended for applications reqquiring minimal mould build-up and low transfer.
-
Thermally stable coating
-
Minimal mould build-up
-
Water-based, semi-permanent release agent
-
Low transfer to the moulded part
- Product category:
- Mould release agents
Technologies:
-
Specialties, primers and coatings
-
Water-based adhesives, mixing (other except PVAC, acrylics and PUD)
- Finish reflection:
- Matt
- Full cure time, @ 150.0 °C:
- 4.0 min.
- Key characteristics:
- Release: rubber release; Water based
-
{{#data}}
{{#distributor.isVisible}}
{{#distributor.isExpanded}}
- {{^distributor.unique}} {{/distributor.unique}} {{/distributor.isExpanded}} {{^distributor.isExpanded}} {{/distributor.isExpanded}} {{/distributor.isVisible}} {{/data}}
