Electrically non-conductive adhesives
Epoxy adhesive for bonding SMD components to PCB
A 1-part, red epoxy adhesive for bonding surface-mounted devices (SMDs) to printed circuit boards (PCBs).
All marks used are trademarks and/or registered trademarks of Henkel and its affiliates in the US, Germany, and elsewhere.
- Description
- Technical specification
LOCTITE® 3616 is a 1-part, red viscous epoxy adhesive for bonding surface-mounted devices (SMDs) to printed circuit boards (PCBs) before wave soldering. It’s designed for applications requiring high print speeds and high wet strength characteristics. It’s particularly used for printing a range of dot heights from one stencil thickness but is also suitable for general small-part bonding. LOCTITE 3616 cures when exposed to heat above 100°C (212°F), typically 90-120 seconds at 150°C (302°F).
-
Suitable for high print speeds
-
High wet strength
- Product category:
- Surface mount adhesives
Technologies:
-
Thermosets, electronics assembly materials
- Casson viscosity, cone & plate Haake PK100, M10/PK1, 2°, @ 25.0 °C:
- 15.0 Pa∙s - 55.0 Pa∙s
- Cure type:
- Heat cure
- Number of components:
- 1 part
- Physical form:
- Paste
- Shear strength, Steel (grit blasted):
- 2175.0 psi
- Storage temperature:
- 2.0 °C - 8.0 °C
- Yield point, cone & plate, Haake PK100, M10/PK1, 2°:
- 200.0 Pa∙s - 450.0 Pa∙s
