Dispense systems
Pneumatically activated dispense valves for acrylics and anaerobics
These diaphragm valves, available with 2 mm and 3 mm orifices, are pneumatically activated dispense valves used with acrylics and anaerobics.
- Description
- Technical specification
The LOCTITE® Diaphragm Valves are pneumatically activated dispense valves that utilize a floating PTFE diaphragm. The valves can be mounted or handheld in conjunction with pressure-time dispense systems. The valves are not suited for cyanoacrylate products. The 2mm orifice Diaphragm Valve is used with low-viscosity anaerobics (up to 2,500 mPa·s). The 3 mm orifice Diaphragm Valve is used with low to medium anaerobic and thixotropic products (2,500 to 5,000 mPa·s). Included in the box: (1) Diaphragm Valve, (1) Product Feed Line 0.25 in., (1) Needle Variety Kit, (1) Operating Manual.
-
Cost effective valves for use with pressure-time systems
-
Modular design and floating diaphragm allow for easy cleaning or repair
-
Fail-safe spring assists closing of valve upon loss of air pressure
-
Internal components are PTFE to prevent premature curing
-
Flow rates can be increased with use of 3/8 in feed line
Applications:
Dispensing adhesives
Fluid pressure, Recommended:
7.0 psi - 58.0 psi
Key characteristics, Recommended:
Viscosity: low viscosity
Used to dispense, Recommended:
Light cure acrylics,Retaining compounds,Threadlockers
Viscosity, Recommended:
0.0 mPa·s - 2500.0 mPa·s