Wear resistant coatings
High-performance, wet and dry abrasion resistant
A 2-part, designed to protect, rebuild and repair processing equipment subject to severe erosion and abrasion.
All marks used are trademarks and/or registered trademarks of Henkel and its affiliates in the US, Germany, and elsewhere.
2565509
-
LOCTITE® PC 7332 Nordbak Wear Prevention Coating, 10 kg Hobbok / pailLOCTITE PC 7332 Part A (2731589)en_GLIDH: 2565509
-
LOCTITE® PC 7332 Nordbak Wear Prevention Coating, 10 kg Hobbok / pailen_GLIDH: 2565509
-
LOCTITE® PC 7332 Nordbak Wear Prevention Coating, 10 kg Hobbok / pailLOCTITE PC 7332 Part B (2728711)en_GLIDH: 2565509
-
LOCTITE® PC 7332 Nordbak Wear Prevention Coating, 10 kg Hobbok / pailLOCTITE PC 7332 Part B (2728711)es_CLIDH: 2565509
-
LOCTITE® PC 7332 Nordbak Wear Prevention Coating, 10 kg Hobbok / pailLOCTITE PC 7332 Part A (2731589)es_CLIDH: 2565509
-
LOCTITE® PC 7332 Nordbak Wear Prevention Coating, 10 kg Hobbok / pailLOCTITE PC 7332 Part A (2731589)en_GLIDH: 2565509
-
LOCTITE® PC 7332 Nordbak Wear Prevention Coating, 10 kg Hobbok / pailLOCTITE PC 7332 Part B (2728711)en_GLIDH: 2565509
-
LOCTITE® PC 7332 Nordbak Wear Prevention Coating, 10 kg Hobbok / pailes_CLIDH: 2565509
-
LOCTITE® PC 7332 Nordbak Wear Prevention Coating, 10 kg Hobbok / pailen_GLIDH: 2565509
- Description
- Technical specification
LOCTITE® PC 7332 Nordbak Wear Prevention Coating is a high-performance, wet and dry abrasion-resistant epoxy resin system. It is designed to protect, rebuild and repair high wear areas of processing equipment, such as desulfurization pumps and ducts, slurry pumps and pipes and slag granulation pumps, which are subject to severe wet abrasion. It can also be used for particle abrasion under dry conditions in transport elbows, chutes and other equipment. It is trowelable, non-sagging and requires no additional tooling.
-
Best-in-class resistance to wet and dry fine article abrasion
-
Tolerant to manually abraded and wet surfaces
-
Easy to mix and apply; trowelable and non-sagging
-
Good dry and wet temperature resistance
-
Functional cure in 6 hours
Application method:
Trowel
Applications:
Protective coating
Color:
Gray
Cure type:
Room temperature (ambient) cure; Two component mix
Key characteristics:
Chemical resistant; Erosion resistance: High; Sag: non-sag
Mix ratio, by volume:
4:1
Mix ratio, by weight:
4:1
Operating temperature:
< 120.0 °C (< 248.0 °F)
Physical form:
Paste
Recommended for use with:
Metal
Shore hardness:
85.0
Work life:
30.0 min
-
{{#data}}
{{#distributor.isVisible}}
{{#distributor.isExpanded}}
-
{{^distributor.unique}}
{{/distributor.unique}}