Part no. (SKU/IDH):
377265
IDH Name:
LOCTITE® FREKOTE® R-150, 5 l Can
Mold release agents
Water-based mould-release emulsion for rubber-to-metal parts
A 1-part, fast and easy-to-apply water-based mould-release emulsion that releases standard rubbers and rubber-to-metal parts with low slip and low mould build-up.
Part no. (SKU/IDH):
377265
IDH Name:
LOCTITE® FREKOTE® R-150, 5 l Can
Size Please make your selection 5 l
Packaging type Please make your selection Can
All marks used are trademarks and/or registered trademarks of Henkel and its affiliates in the US, Germany, and elsewhere.
-
{{#data}}
{{#distributor.isVisible}}
{{#distributor.isExpanded}}
- {{^distributor.unique}} {{/distributor.unique}} {{/distributor.isExpanded}} {{^distributor.isExpanded}} {{/distributor.isExpanded}} {{/distributor.isVisible}} {{/data}}
- Description
- Technical specification
LOCTITE® FREKOTE® R-150 is a water-based mould-release emulsion that releases standard rubbers and rubber-to-metal parts. It exhibits low slip and low mould build-up and is fast and easy to apply with a spray gun. It is heat-cured: multiple coats are applied to the heated mould, with no drying time needed between coats above 150°C (302°F). Final coat-drying time can be as short as 4 minutes.
-
Suitable for all standard rubbers
-
Low slip, low mould build-up
-
Fast and easy to apply
-
For rubber-to-metal parts
-
Fast cure time
- Product category:
- Mold release agents
Technologies:
-
Specialties, primers and coatings
- Finish reflection:
- Matte
- Full cure time, @ 150.0 °C:
- 4.0 min.
- Key characteristics:
- Release: rubber release; Water based
-
{{#data}}
{{#distributor.isVisible}}
{{#distributor.isExpanded}}
- {{^distributor.unique}} {{/distributor.unique}} {{/distributor.isExpanded}} {{^distributor.isExpanded}} {{/distributor.isExpanded}} {{/distributor.isVisible}} {{/data}}
