Light curing systems
High-performance modular curing system for LOCTITE UV-cure adhesives
This high-performance modular curing system consists of a curing chamber, lamp housing and controller, and typical UV irradiance is up to 110 mW/cm2.
All marks used are trademarks and/or registered trademarks of Henkel and its affiliates in the US, Germany, and elsewhere.
- Description
- Technical specification
LOCTITE® 97055 UVALOC 1000 UV Cure Chamber is a high-performance modular curing system with four rack levels to allow for easy positioning at levels of optimum exposure. The lamp is shielded by a timed control shutter, meaning operators are not exposed to UV during loading and unloading. Cure time is controlled by a built-in timer and can be operated in a continuous or timed mode. The exposure cycle is triggered by the footswitch, panel-mount start button, or PLC interface, and lamp intensity is continually monitored. The parabolic-shaped reflector generates a uniformly illuminated radiation area, and you can expect 1,000 hours of UV bulb life with proper handling and maintenance.
-
Typical UV irradiance: up to 110 mW/cm2
-
Dual power setting (500/1000 watts) means no heat damage
-
Effective cure area of 160mm x 160mm (6.3in x 6.3in)
-
Setting exposure time: 3 secs to 15 min in 1-second increments
-
The standard lamp included is a mercury vapor lamp; 365 nm wavelength
- Product category:
- UV and visible light curing systems
Technologies:
-
Specialties, equipment
