Dispense systems
For dispensing of 1-part products up to 15,000 mPa·s viscosity
This applicator is specially designed for manual dispensing of 1-part products up to 15,000 mPa·s viscosity with reduced hand fatigue.
- Description
- Technical specification
The LOCTITE® Manual Handheld Applicator is a pressure time dispense valve actuated by a finger trigger, which is ergonomically designed for comfort, application control, and a low actuation force to reduce hand fatigue. It incorporates a suck-back feature, which prevents dripping or stringing. The valve can be used in conjunction with LOCTITE Reservoirs as a substitute for the LOCTITE Vari-Drop Applicator. If dispensing an adhesive over 15,000 mPa·s, then a 10 cm (3/8") feed line upgrade kit is available that will allow dispensing products up to 80,000 mPa·s viscosity.
-
Included in the box: (1) Handheld Applicator, (1) applicator grip, (1) trigger lever, (1) needle kit, (1) operating manual
Air input pressure, Recommended:
60.0 psi - 60.0 psi
Applications:
Dispensing adhesives
Fluid pressure, Recommended:
4.0 psi - 35.0 psi
Key characteristics, Recommended:
Stroke adjustment,Vacuum suck-back,Viscosity: low to medium viscosity
Used to dispense, Recommended:
Light cure acrylics,Retaining compounds,Threadlockers
