Dispense systems
Convenient and cost-effective reservoir for manual applicators
This cost-effective manual dispensing reservoir works with a variety of LOCTITE adhesives and dispense valves.
Marketing materials
All marks used are trademarks and/or registered trademarks of Henkel and its affiliates in the US, Germany, and elsewhere.
- Description
- Technical specification
LOCTITE® RC30 Manual Reservoir is perfect for dispensing anaerobic, UV curing, and cyanoacrylate adhesives. It typically works as part of a dispensing system, complete with dispensing valve and LOCTITE controller. The tabletop reservoir has a convenient, user-friendly design and can integrate directly with LOCTITE valves and controllers. It can handle 250 ml (8.4 oz), 200 g (7 oz), 500 g (17.6 oz), 1 liter (35 oz) and 2 kg (4.4 lb) adhesive packages. The reservoir is equipped with a low-level sensor. Included in the box: (1) RC30 Manual Reservoir, (1) reservoir tank fitting: 6 mm (¼") NPT x 6 mm (¼") tubing, (1) bottle nesting basket, (1) anti-bubbler fitting and tube kit, (1) 6 mm (¼") NPT to 6 mm (0.2") inlet supply line connector, (1) operating manual.
-
Cost effective
-
Low-level sensor for process control
-
Integrates directly with LOCTITE valves and controllers
-
Equipped with a 0-7 bar (0-100 psi) analog pressure regulator
- Product category:
- Controllers and dispense reservoirs
Technologies:
-
Specialties, equipment
- Applications:
- Dispensing adhesives
- Fluid pressure:
- 0.0 psi - 100.0 psi (0.0 bar - 7.0 bar)
- Key characteristics:
- Low level sensing
- Operating type:
- Manual
- Used to dispense:
- Cyanoacrylates,Retaining compounds,Threadlockers,UV and visible light cure adhesives
- Works with package types & sizes:
- Bottle, 1 l,Bottle, 2 kg,Bottle, 250 ml,Bottle, 500 g,Squeeze tube, 200 g
How to use
