Part no. (SKU/IDH):
1429426
IDH Name:
LOCTITE® FREKOTE® R-220, 5 l Can
Mold release agents
Release emulsion for difficult-to-release rubbers and highly filled elastomers
A 1-part, water-based mould-release emulsion whose high-slip properties make it ideal for difficult-to-release rubbers such as EPDM and highly filled elastomers.
Part no. (SKU/IDH):
1429426
IDH Name:
LOCTITE® FREKOTE® R-220, 5 l Can
All marks used are trademarks and/or registered trademarks of Henkel and its affiliates in the US, Germany, and elsewhere.
-
{{#data}}
{{#distributor.isVisible}}
{{#distributor.isExpanded}}
- {{^distributor.unique}} {{/distributor.unique}} {{/distributor.isExpanded}} {{^distributor.isExpanded}} {{/distributor.isExpanded}} {{/distributor.isVisible}} {{/data}}
- Description
- Technical specification
LOCTITE® FREKOTE® R-220 is a water-based mould-release emulsion with high-slip properties that make it ideal for difficult-to-release rubbers such as EPDM and highly filled elastomers. Fast and easy to apply via spray foam, the agent gives a gloss finish. This is a heat-cured product; multiple coats are applied to the heated mould – no drying time needed between coats. Final coat drying time around 4 minutes.
-
Ideal for difficult-to-release rubbers
-
Fast and easy to apply
-
Also for highly filled elastomers
-
High slip, low mould build-up
-
Fast cure time
- Product category:
- Mold release agents
Technologies:
-
Water-based adhesives, mixing (other except PVAC, acrylics and PUD)
-
Specialties, primers and coatings
- Finish reflection:
- Gloss
- Full cure time, @ 150.0 °C:
- 4.0 min.
- Key characteristics:
- Release: rubber release; Water based
-
{{#data}}
{{#distributor.isVisible}}
{{#distributor.isExpanded}}
- {{^distributor.unique}} {{/distributor.unique}} {{/distributor.isExpanded}} {{^distributor.isExpanded}} {{/distributor.isExpanded}} {{/distributor.isVisible}} {{/data}}
