Part no. (SKU/IDH):
2921061
IDH Name:
LOCTITE® TFX 3010, 2 x 200 ml Standard cartridge
Thermal gap fillers
2-component, SMP-based, silicone-free thermal gap filler for EV battery repair.
2-component, SMP-based, silicone-free thermal gap filler for high-performance thermal management in EV battery repair, with thermal conductivity of up to 3 W/mK.
-
LOCTITE® TFX 3010, 2 x 200 ml Standard cartridge en_GLLOCTITE TFX 3010 PTA (3053673)IDH: 2921061
-
LOCTITE® TFX 3010, 2 x 200 ml Standard cartridge en_GLSF- TFX 3010-A CR200ML EX (2898629)IDH: 2921061
-
LOCTITE® TFX 3010, 2 x 200 ml Standard cartridge en_GLSF- TFX 3010-B CR200ML EX (2900914)IDH: 2921061
-
LOCTITE® TFX 3010, 2 x 200 ml Standard cartridge en_GLLOCTITE TFX 3010 PTB (3053674)IDH: 2921061
-
LOCTITE® TFX 3010, 2 x 200 ml Standard cartridge en_GLSF- TFX 3010-A CR200ML EX (2898629)IDH: 2921061
-
LOCTITE® TFX 3010, 2 x 200 ml Standard cartridge en_GLLOCTITE TFX 3010 PTB (3053674)IDH: 2921061
-
LOCTITE® TFX 3010, 2 x 200 ml Standard cartridge en_GLLOCTITE TFX 3010 PTA (3053673)IDH: 2921061
-
LOCTITE® TFX 3010, 2 x 200 ml Standard cartridge en_GLSF- TFX 3010-B CR200ML EX (2900914)IDH: 2921061
Part no. (SKU/IDH):
2921061
IDH Name:
LOCTITE® TFX 3010, 2 x 200 ml Standard cartridge
All marks used are trademarks and/or registered trademarks of Henkel and its affiliates in the US, Germany, and elsewhere.
-
{{#data}}
{{#distributor.isVisible}}
{{#distributor.isExpanded}}
- {{^distributor.unique}} {{/distributor.unique}} {{/distributor.isExpanded}} {{^distributor.isExpanded}} {{/distributor.isExpanded}} {{/distributor.isVisible}} {{/data}}
- Description
- Technical specification
LOCTITE® TFX 3010 is a 2-component, SMP-based, silicone-free thermal gap filler specifically designed for high-performance thermal management in EV batteries. With thermal conductivity of up to 3 W/mK, it ensures efficient heat transfer and cures at room temperature. Ideal for EV battery repair, it offers an extended shelf life, excellent dispensability, and low compressive stress during installation, making it a reliable, workshop-friendly solution for optimal performance.
-
Efficient heat transfer with a thermal conductivity of up to 3 W/mK, ensuring optimal thermal management.
-
Cures at room temperature, offering easy and convenient application without the need for external heat.
-
Outstanding dispensability for easy and precise application.
-
Low compressive stress during installation, preserving the integrity of components and ensuring a secure fit.
-
12-month shelf life, solvent- and isocyanate-free for enhanced health & safety
- Product category:
- Thermal gap fillers
Technologies:
-
Thermal management, high volume liquids
- Mixed: Color:
- Dark gray
- Mixed: Cure type:
- Room temperature (ambient) cure
- Mixed: Mix ratio, by volume:
- 1:1
- Mixed: Thermal conductivity:
- 3.0 W/mK
- Mixed: Work life:
- 60.0 min.
- Number of components:
- 2 part
How to use
Using a plastic spatula (metal could damage the cooling plate), remove any remaining thermal gap filler from the cooling plate.
Clean the cooling plate with TEROSON® VR 10 and a lint-free cloth.
Open the LOCTITE® TFX 3010 thermal gap filler cartridges A+B by removing the lower cap and piercing the upper membrane. Connect them to the manifold. For faster dispensing, both cartridges can be preheated in the TEROSON® Cartridge Preheating Box at 60°C (for at least 15 minutes, up to a maximum of 60 minutes). Remove the lower cap before preheating.
Insert the cartridges into the LOCTITE® EQ HD 16 2C Pneumatic Dispenser and secure them using the locking mechanism.
Gently squeeze the trigger and dispense a small amount of material, ensuring that both components A and B are dispensed evenly.
Attach the static mixer to the dispenser and dispense approximately 5 cm of product before use to ensure even mixing of the two components.
Position the OEM-specific application template on the cooling plate.
Apply LOCTITE® TFX 3010 Thermal Gap Filler smoothly and evenly into the application template according to the OEM's instructions, keeping the tip of the static mixer embedded in the material to avoid trapping air.
Carefully remove the application template from the battery tray and clean it using TEROSON® VR 10 and a lint-free cloth.
Place the battery module on the applied thermal gap filler within the 60-minute working time and press it evenly into its final position. Secure the module with the original fasteners. If you see gap filler at the edges of the battery module, you have applied sufficient force and the correct amount of material. Reconnect the electronics to the new battery module.
FAQ
LOCTITE® TFX 3010 is an OEM-approved thermal gap filler with a high thermal conductivity of 3 W/mK. Its easy dispensing ensures a complete fill of gaps between the battery module and cooling system, creating a void-free heat transfer interface. This ensures efficient thermal management of EV battery systems during both charging and discharging, while promoting a high heat transfer rate due to its superior thermal conductivity. For more technical information, please contact us. [link to contact page]
LOCTITE® TFX 3010 has a low lap shear, meaning it exhibits low adhesion and can be easily removed from substrates such as cooling plates or battery modules. This feature allows technicians to rework, adjust, or remove the dispensed material with ease, ensuring proper repair. Even after the product has fully cured, it remains simple to disassemble and remove, making it highly serviceable if the battery pack needs to be reopened.
It is NOT recommended to reuse LOCTITE® TFX 3010 in an EV battery system. Any minor defects or tears in the old thermal gap filler may create voids and gaps, compromising thermal management effectiveness and potentially causing heat transfer failure. For optimal performance, always use new LOCTITE® TFX 3010 for repairs.
LOCTITE® TFX 3010 spreads easily and requires minimal compressive force when the modules are assembled onto cooling plates and compressed. To ensure even distribution of compression force and to prevent any impact on the modules, we recommend using our LOCTITE® EQ HD 16 2C Pneumatic Dispenser [link to the dispenser page]. A proper template, tailored to the battery design, can also be used to achieve the desired pattern. It is essential to follow the manufacturer’s requirements and procedures for optimal results. For more information, please contact us. [link to contact page]
-
{{#data}}
{{#distributor.isVisible}}
{{#distributor.isExpanded}}
- {{^distributor.unique}} {{/distributor.unique}} {{/distributor.isExpanded}} {{^distributor.isExpanded}} {{/distributor.isExpanded}} {{/distributor.isVisible}} {{/data}}
