Part no. (SKU/IDH):
2565509
IDH Name:
LOCTITE® PC 7332 Nordbak Wear Prevention Coating, 10 kg Hobbok / pail
Wear resistant coatings
High-performance, wet and dry abrasion resistant
A 2-part, designed to protect, rebuild and repair processing equipment subject to severe erosion and abrasion.
-
LOCTITE® PC 7332 Nordbak Wear Prevention Coating, 10 kg Hobbok / pail en_GLLOCTITE PC 7332 Part A (2731589)IDH: 2565509
-
LOCTITE® PC 7332 Nordbak Wear Prevention Coating, 10 kg Hobbok / pail en_GLIDH: 2565509
-
LOCTITE® PC 7332 Nordbak Wear Prevention Coating, 10 kg Hobbok / pail en_GLLOCTITE PC 7332 Part B (2728711)IDH: 2565509
-
LOCTITE® PC 7332 Nordbak Wear Prevention Coating, 10 kg Hobbok / pail es_ARIDH: 2565509
-
LOCTITE® PC 7332 Nordbak Wear Prevention Coating, 10 kg Hobbok / pail en_GLLOCTITE PC 7332 Part A (2731589)IDH: 2565509
-
LOCTITE® PC 7332 Nordbak Wear Prevention Coating, 10 kg Hobbok / pail es_ARLOCTITE PC 7332 Part B (2728711)IDH: 2565509
-
LOCTITE® PC 7332 Nordbak Wear Prevention Coating, 10 kg Hobbok / pail en_GLLOCTITE PC 7332 Part B (2728711)IDH: 2565509
-
LOCTITE® PC 7332 Nordbak Wear Prevention Coating, 10 kg Hobbok / pail es_ARLOCTITE PC 7332 Part A (2731589)IDH: 2565509
-
LOCTITE® PC 7332 Nordbak Wear Prevention Coating, 10 kg Hobbok / pail en_GLIDH: 2565509
Part no. (SKU/IDH):
2565509
IDH Name:
LOCTITE® PC 7332 Nordbak Wear Prevention Coating, 10 kg Hobbok / pail
All marks used are trademarks and/or registered trademarks of Henkel and its affiliates in the US, Germany, and elsewhere.
-
{{#data}}
{{#distributor.isVisible}}
{{#distributor.isExpanded}}
-
{{^distributor.unique}}
{{/distributor.unique}}
- Description
- Technical specification
LOCTITE® PC 7332 Nordbak Wear Prevention Coating is a high-performance, wet and dry abrasion-resistant epoxy resin system. It is designed to protect, rebuild and repair high wear areas of processing equipment, such as desulfurization pumps and ducts, slurry pumps and pipes and slag granulation pumps, which are subject to severe wet abrasion. It can also be used for particle abrasion under dry conditions in transport elbows, chutes and other equipment. It is trowelable, non-sagging and requires no additional tooling.
-
Best-in-class resistance to wet and dry fine article abrasion
-
Tolerant to manually abraded and wet surfaces
-
Easy to mix and apply; trowelable and non-sagging
-
Good dry and wet temperature resistance
-
Functional cure in 6 hours
- Product category:
- Wear resistant coatings
Technologies:
-
2K general epoxy
- Application method:
- Trowel
- Applications:
- Protective coating
- Color:
- Gray
- Cure type:
- Room temperature (ambient) cure; Two component mix
- Key characteristics:
- Chemical resistant; Erosion resistance: High; Sag: non-sag
- Mix ratio, by volume:
- 4:1
- Mix ratio, by weight:
- 4:1
- Operating temperature:
- < 120.0 °C (< 248.0 °F)
- Physical form:
- Paste
- Recommended for use with:
- Metal
- Shore hardness:
- 85.0
- Work life:
- 30.0 min
-
{{#data}}
{{#distributor.isVisible}}
{{#distributor.isExpanded}}
-
{{^distributor.unique}}
{{/distributor.unique}}
