Threadlockers
Blue, low strength threadlocker for plastic fasteners
Blue, fast curing low strength cyanoacrylate-based adhesive for locking metal and plastic fasteners.
All marks used are trademarks and/or registered trademarks of Henkel and its affiliates in the US, Germany, and elsewhere.
135461
- Description
- Technical specification
LOCTITE® 425 is a dark blue, cyanoacrylate based adhesive designed as a fast curing, low strength adhesive for locking metal and plastics fasteners. It is designed for pre- or post-application. Fixture speed can be increased by using a LOCTITE® activator, such as SF 7113. It is typically used in applications with an operating range of -65°F to +185°F (-54°C to +85°C).
-
Cures within 2 minutes on plated metal and plastics fasteners with full strength in 24 hours
-
Used for tamper proofing the heads of screws or potentiometers
Application method:
Dispense Gun
Applications:
Threadlocking
Color:
Dark Blue
Cure type:
Moisture Cure
Fixture time:
90.0 sec.
Full cure time, @ 25.0 °C:
24.0 hr.
Key characteristics:
Cure Speed: Fast Cure,General Purpose,Mix: No Mix Required,Strength: Low Strength
Number of components:
1 Part
Physical form:
Liquid
Recommended for use with:
Metal,Plastic
Specific gravity, @ 25.0 °C:
1.1
Viscosity, Brookfield - LVF, @ 25.0 °C:
40.0 mPa·s (cP) - 80.0 mPa·s (cP)
How to use
For best performance bond surfaces should be clean andfree from grease.
LOCTITE® 425 performs best in thin bond gaps (0.05 mm).
Excess adhesive can be dissolved with LOCTITE cleaning solvents, nitromethane or acetone.
FAQ
LOCTITE® 425 is designed as a fast curing, low strength adhesive for locking small metal and plastic fasteners.
-
{{#data}}
{{#distributor.isVisible}}
{{#distributor.isExpanded}}
-
{{^distributor.unique}}
{{/distributor.unique}}