Threadlockers
Red, high strength threadlocker
High strength, red thixotropic anaerobic-curing threadlocking adhesive for locking and sealing threaded fasteners.
All marks used are trademarks and/or registered trademarks of Henkel and its affiliates in the US, Germany, and elsewhere.
Size Please make your selection 0.5 ml
Packaging type Please make your selection Tube
- Description
- Technical specification
LOCTITE® 262 is a red, general purpose, high strength, anaerobic-curing threadlocking adhesive. Prevents threaded fasteners from loosening due to heavy shock and vibration. Ideal for applications where any migration of the adhesive must be prevented. Can tolerate slight contaminations of industrial oils. Suitable for all metal fasteners. It fluoresces under UV light to enable QC monitoring.
-
Resistant to vibration
-
Fluoresces to allow quality control and inspection
-
Tolerates slight contaminations of industrial oils
-
Suitable for all metal fasteners
-
High strength, general purpose
Agency approvals / certificates / specifications:
NSF
Chemical basis / base:
Methacrylate
Color:
Red
Fixture time:
8.0 min. - 180.0 min.
Key characteristics:
Thixotropic
Recommended for use with:
Metal: Brass,Metal: Steel,Metal: Steel - Stainless Steel
Viscosity, Brookfield - RVT, @ 25.0 °C:
1200.0 mPa·s (cP) - 2400.0 mPa·s (cP)
How to use
LOCTITE® 262™ is suitable for use on most "as-received" fasteners with light coatings of corrosion prevention oils without cleaning. However, for heavily oiled or contaminated fasteners, it is recommended to use LOCTITE® SF 7070™ to degrease and clean surfaces prior to applying LOCTITE 262 threadlocker.
If cure speed is too slow due to passive metals (stainless steel, aluminum and plated metals) or low temperature (below 5°C), use activator LOCTITE® SF 7649™ (see cure speed vs activator graph in the TDS).
If cure speed is too slow due to passive metals (stainless steel, aluminum and plated metals) or low temperature (below 5°C), use activator LOCTITE® SF 7649™ (see cure speed vs activator graph in the TDS).
Insert bolt and apply threadlocker to the exposed thread. Assemble nut and tighten to the correct/specified torque.
Apply several drops of liquid threadlocker down the sides of the blind hole filling the lower third. Apply several drops to the bolt.
Assemble and tighten. If several bolts are being assembled, torque them down to the correct value within the fixture.
Disassemble with standard hand tools.
For the disassembly of corroded or seized parts use LOCTITE® LB 8040™ Freeze and Release.
FAQ
Prevent vibration loosening, prevent leaks, protect threaded components from corrosion and increase the reliability of mechanical fasteners by using a LOCTITE® anaerobic threadlocking adhesive.
The standard continuous operating temperature range for LOCTITE® anaerobic adhesives is -55˚C to +150˚C.Depending on the specific application requirements, high-performance grades are also available offering increased temperature resistance. Please consult with the Henkel technical team for availability and grade selection.
Yes, LOCTITE® anaerobic adhesives and sealants become highly resistant thermoset polymers once cured, making them suitable for a vast number of applications. Consult our online product resources or contact our technical teams for further information.
Yes, these products are all anaerobic adhesives that will function in a similar way. Variations in the adhesive characteristics (viscosity, gap-fill, strength etc.) will make them better suited to certain applications. Consult the product technical data sheets and/or LOCTITE® representatives for further information.
-
{{#data}}
{{#distributor.isVisible}}
{{#distributor.isExpanded}}
-
{{^distributor.unique}}
{{/distributor.unique}}