Part no. (SKU/IDH):
381038
IDH Name:
LOCTITE® FREKOTE® FMS, 1 l Can
Mold release sealants
Fast-cure, high-gloss sealer for composite molds
Wipe-on, solvent-based composite molds sealer for a high-gloss surface.
Part no. (SKU/IDH):
381038
IDH Name:
LOCTITE® FREKOTE® FMS, 1 l Can
All marks used are trademarks and/or registered trademarks of Henkel and its affiliates in the US, Germany, and elsewhere.
-
{{#data}}
{{#distributor.isVisible}}
{{#distributor.isExpanded}}
- {{^distributor.unique}} {{/distributor.unique}} {{/distributor.isExpanded}} {{^distributor.isExpanded}} {{/distributor.isExpanded}} {{/distributor.isVisible}} {{/data}}
- Description
- Technical specification
Wipe on LOCTITE® FREKOTE® FMS solvent-based sealer in your composite molds preparation phase for a high gloss surface. It is formulated specifically as a sealer for fibreglass reinforced polyester, epoxy and other composite molds. It seals microporosities and provides uniform release agent coating. Allow approximately 15 minute dry time at 20°C (68°F) between coats, and then 20 minutes for final coat.
-
High gloss surface
-
Wipe-on application
-
Sealer for composite molds
- Product category:
- Mold release sealants
Technologies:
-
Specialties, primers and coatings
- Applications:
- Mould preparation
- Finish reflection:
- Gloss: high gloss
- Full cure time, @ 20.0 °C:
- 20.0 min.
- Key characteristics:
- Solvent based
-
{{#data}}
{{#distributor.isVisible}}
{{#distributor.isExpanded}}
- {{^distributor.unique}} {{/distributor.unique}} {{/distributor.isExpanded}} {{^distributor.isExpanded}} {{/distributor.isExpanded}} {{/distributor.isVisible}} {{/data}}
