Adhesive primers
Instant adhesive primer for difficult-to-bond materials
Primer for making polyolefin and other low-energy surfaces suitable for bonding with LOCTITE instant adhesive. Only recommended for difficult-to-bond substrates.
All marks used are trademarks and/or registered trademarks of Henkel and its affiliates in the US, Germany, and elsewhere.
- Description
- Technical specification
LOCTITE® SF 770 is a primer for making difficult-to-bond substrates and low energy surfaces suitable for bonding with LOCTITE® instant adhesives. Ideal for polyethylene, polypropylene, polytetrafluoroethylene (PTFE) and thermoplastic rubber materials, it fluoresces for quality control and inspection. Not recommended in assemblies where high peel strength is required.
-
Prepares low-energy surfaces for bonding with instant adhesives
-
Only for difficult-to-bond plastics
-
Fluorescent under UV for quality control
-
Not recommended where high peel strength is required
-
IMPORTANT: this product was upgraded in 2021/22. Use the correct product IDH/item number to ensure correct SDS is downloaded.
- Product category:
- Adhesive primers
Technologies:
-
Liquid, solvent
-
Cyanoacrylate
- Application method:
- Pre-applied
- Color:
- Ultra clear
- Key characteristics:
- Adhesion: improves adhesion,Solvent based
How to use
It is recommended to use the correct LOCTITE® cleaner for the surface to be bonded (such as LOCTITE® SF 7070) to degrease and clean surfaces prior to applying the adhesive.
To improve adhesion on difficult to bond plastic surfaces, apply LOCTITE® SF 770 to the bond area by brushing or dipping. Avoid applying excess primer. Allow the primer to dry.
FAQ
Primer should be applied via brush or spray sparingly to any/all difficult-to-bond substrates that are being bonded.
