Structural adhesives
Low viscosity structural bonder for interior permanent magnets
This 2-step, no-mix, low-viscosity structural bonder shows high impact resistance and is specially designed for interior permanent magnet (IPM) bonding.
All marks used are trademarks and/or registered trademarks of Henkel and its affiliates in the US, Germany, and elsewhere.
- Description
- Technical specification
LOCTITE® AA 3510 is a high-impact resistant structural adhesive for interior permanent magnet (IPM) bonding. It cures through UV light in 30 seconds, providing large gap fills up to 2-3 mm (0.08"-0.11"), and provides a robust room-temperature curing performance in bond gaps of up to 0.254 mm (0.01"). Temperature resistance is up to 120°C (248°F). Please note this product requires LOCTITE® SF 7091 to activate (solvent-free).
-
High impact resistance: >25 J measured by ISO 11343
-
Very high shear strength: 23 N/mm²
-
UV cure in 30 seconds
-
Large gap-fill up to 0.254 mm (0.01")
-
Temperature resistant up to 120°C (248°F)
- Product category:
- Structural adhesives
Technologies:
-
Acrylates, anaerobic cure
- Applications:
- Structural bonding
- Chemical basis / base:
- Urethane methacrylate ester
- Color:
- Light amber
- Cure type:
- Anaerobic cure; UV cure
- Fixture time, Steel:
- 30.0 sec.
- Gap fill, @ 22.0 °C:
- 0.25 mm
- Number of components:
- 1 part
- Operating temperature:
- -40.0 °C - 150.0 °C
- Shear strength, Mild Steel (grit blasted):
- > 23.0 N/mm²
- Viscosity, cone & plate, @ 25.0 °C:
- 300.0 mPa·s (cP) - 800.0 mPa·s (cP)
