Part no. (SKU/IDH):
478490
IDH Name:
LOCTITE® Benchtop Cartridge Pusher (300ml)
Dispense systems
For dispensing a wide range of material
This cartridge pusher is designed for dispensing low-viscosity product to high extrusion rate pastes from 300 ml (10 oz) cartridges.
Part no. (SKU/IDH):
478490
IDH Name:
LOCTITE® Benchtop Cartridge Pusher (300ml)
All marks used are trademarks and/or registered trademarks of Henkel and its affiliates in the US, Germany, and elsewhere.
-
{{#data}}
{{#distributor.isVisible}}
{{#distributor.isExpanded}}
-
{{^distributor.unique}}
{{/distributor.unique}}
- Description
- Technical specification
LOCTITE® Benchtop Cartridge Pusher (300ml) is a front loaded, closed system that can discharge material horizontally or vertically from a 300 ml (10 oz) cartridge. The freestanding device mechanically applies pressure to the cartridge plunger using a pneumatically driven ram. It is compatible with LOCTITE single or 3-function controllers or existing work cells.
-
Pneumatically driven ram
-
Equipped with 0 to 60 psi adjustable pressure regulator
-
Low level sensor
-
Can be mounted vertically or horizontally
- Product category:
- Single cartridge dispense systems
Technologies:
-
Specialties, equipment
- Air input pressure, Recommended:
- 0.0 psi - 50.0 psi
- Applications:
- Dispensing adhesives
- Fluid pressure, Recommended:
- 0.0 psi - 50.0 psi
- Key characteristics, Recommended:
- Low level sensing; Viscosity: low to medium viscosity
- Used to dispense, Recommended:
- Adhesives-gel; Light cure acrylics; Silicones; Thread sealants
-
{{#data}}
{{#distributor.isVisible}}
{{#distributor.isExpanded}}
-
{{^distributor.unique}}
{{/distributor.unique}}
