Part no. (SKU/IDH):
416032
IDH Name:
LOCTITE® FREKOTE® 770-NC, 1 gal Can
Mold release agents
Moisture-cured epoxy for advanced composites and FRP polyester parts
A 1-part, clear, solvent-based, moisture-cured, epoxy mold release agent for advanced composites and FRP polyester parts.
Part no. (SKU/IDH):
416032
IDH Name:
LOCTITE® FREKOTE® 770-NC, 1 gal Can
All marks used are trademarks and/or registered trademarks of Henkel and its affiliates in the US, Germany, and elsewhere.
-
{{#data}}
{{#distributor.isVisible}}
{{#distributor.isExpanded}}
- {{^distributor.unique}} {{/distributor.unique}} {{/distributor.isExpanded}} {{^distributor.isExpanded}} {{/distributor.isExpanded}} {{/distributor.isVisible}} {{/data}}
- Description
- Technical specification
LOCTITE® FREKOTE® 770-NC is a clear, solvent-based, moisture-cured, epoxy mold release agent for advanced composites and FRP polyester parts. It is a versatile, semi-permanent release agent with high thermal stability, with high slip to compensate for mold geometry problems. Wiped or sprayed on, it creates a high gloss finish, and dry time between coats is just 5-10 minutes.
-
High slip compensates for mold geometry problems
-
Universal for advanced composites
-
Also for FRP polyester parts
-
High gloss finish
- Product category:
- Mold release agents
Technologies:
-
Specialties, primers and coatings
- Drying time between coats, @ 20.0 °C:
- 5.0 min.
- Finish reflection:
- Gloss: high gloss
- Full cure time, @ 20.0 °C:
- 10.0 min.
- Key characteristics:
- Solvent based
- Recommended for use with:
- Composite: advanced composites; Fiberglass reinforced plastic (FRP)
-
{{#data}}
{{#distributor.isVisible}}
{{#distributor.isExpanded}}
- {{^distributor.unique}} {{/distributor.unique}} {{/distributor.isExpanded}} {{^distributor.isExpanded}} {{/distributor.isExpanded}} {{/distributor.isVisible}} {{/data}}
Our experts are here to learn more about your needs.
Our support center and experts are ready to help you find solutions for your business needs.