Part no. (SKU/IDH):
231114
IDH Name:
LOCTITE® AA 330 / LOCTITE® SF 7388 KIT, 50 g/40 ml Mixed
Structural adhesives
Multi-substrate structural adhesive kit
A 2-part, high-viscosity acrylic adhesive kit for a wide array of substrates.
Part no. (SKU/IDH):
231114
IDH Name:
LOCTITE® AA 330 / LOCTITE® SF 7388 KIT, 50 g/40 ml Mixed
All marks used are trademarks and/or registered trademarks of Henkel and its affiliates in the US, Germany, and elsewhere.
-
{{#data}}
{{#distributor.isVisible}}
{{#distributor.isExpanded}}
-
{{^distributor.unique}}
{{/distributor.unique}}
- Description
- Technical specification
The LOCTITE® AA 330 / LOCTITE SF® 7388 kit consists of two parts: a slightly cloudy, colourless to pale yellow, general-purpose, acrylic-based adhesive and a heptane/isopropanol-based activator. It’s designed for general-assembly applications and is compatible with metal, wood, ferrite, ceramic and plastic materials. It’s typically used for tool handles, appliances, sporting goods and decorative trim.
-
High viscosity
-
Multi-substrate
-
Registered to NSF Category P1
- Product category:
- Structural adhesives
Technologies:
-
Non-methyl methacrylate (MMA) structural adhesives
How to use
Check bonding surfaces and remove contamination such as excessive oil or loose oxide layers when maximum bond strength is required.
Clean the bonding surfaces when necessary to improve cure speed and achieve maximum bond strength.
Brush LOCTITE® SF 7388 onto one of the mating surfaces to be bonded.
Apply the toughened acrylic adhesive to the opposing mating surface.
FAQ
It is an activator designed to initiate and promote the cure of LOCTITE- toughened acrylic adhesives.
It is designed for use with LOCTITE-toughened acrylic adhesives.
The activator remains active on the surface for up to 6 hours. Assembly should be completed within this period. Ideally, to avoid the risk of contamination, the surfaces should be assembled as soon as possible after application.
Assembly should be completed as quickly as possible, within 15 seconds of adhesive application onto an activated surface.
Yes. Treatment of both mating surfaces is recommended when gaps exceed 0.4 mm or when maximum cure speed is required.
-
{{#data}}
{{#distributor.isVisible}}
{{#distributor.isExpanded}}
-
{{^distributor.unique}}
{{/distributor.unique}}
Our experts are here to learn more about your needs.
Our support centre and experts are ready to help you find solutions for your business needs.