Dispense systems
For dispensing of 1-part products up to 15,000 mPa·s viscosity
This applicator is specially designed for manual dispensing of 1-part products up to 15,000 mPa·s viscosity with reduced hand fatigue.
All marks used are trademarks and/or registered trademarks of Henkel and its affiliates in the US, Germany, and elsewhere.
- Description
- Technical specification
The LOCTITE® Manual Handheld Applicator is a pressure time dispense valve actuated by a finger trigger, which is ergonomically designed for comfort, application control, and a low actuation force to reduce hand fatigue. It incorporates a suck-back feature, which prevents dripping or stringing. The valve can be used in conjunction with LOCTITE® Reservoirs as a substitute for the LOCTITE® Vari-Drop Applicator. If dispensing an adhesive over 15,000 mPa·s, then a 10 cm (3/8") feed line upgrade kit is available that will allow dispensing products up to 80,000 mPa·s viscosity.
-
Included in the box: (1) Handheld Applicator, (1) applicator grip, (1) trigger lever, (1) needle kit, (1) operating manual
- Product category:
- Handheld dispense valves
Technologies:
-
Specialties, equipment
- Air input pressure, Recommended:
- 60.0 psi - 60.0 psi
- Applications:
- Dispensing adhesives
- Fluid pressure, Recommended:
- 4.0 psi - 35.0 psi
- Key characteristics, Recommended:
- Stroke adjustment,Vacuum suck-back,Viscosity: low to medium viscosity
- Used to dispense, Recommended:
- Light cure acrylics,Retaining compounds,Threadlockers
